ASTM 美國緊固件標準目錄
ASTM 美國緊固件標準目錄
|
序號
|
標準號
|
英文名稱
|
中文名稱
|
被替代標準
|
|
1
|
ASTM A31-2004e1
|
Standard Specification for Steel Rivets and Bars for Rivets, Pressure Vessels
|
壓力容器鋼鉚釘和鉚釘用棒材規格
|
|
|
2
|
ASTM A307-2004e1
|
Standard Specification for Carbon Steel Bolts and Studs, 60 000 PSI Tensile Strength
|
抗拉強度為60000PSI的碳素鋼螺栓和柱頭螺栓的規格
|
|
|
3
|
ASTM A325-2006
|
Standard Specification for Structural Bolts, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength
|
經熱處理的最小抗拉強度為120/105 ksi的結構用鋼螺栓規格
|
ASTM A325-04
|
|
4
|
ASTM A325M-2005
|
Standard Specification for Structural Bolts, Steel, Heat Treated 830 MPa Minimum Tensile Strength [Metric]
|
最小抗拉強度為830 MPa的熱處理結構鋼螺栓規格（公制）
|
ASTM A325M-04
|
|
5
|
ASTM A354-2004e1
|
Standard Specification for Quenched and Tempered Alloy Steel Bolts, Studs, and Other Externally Threaded Fasteners
|
淬火和回火合金鋼螺栓、雙頭螺栓和其它外螺紋緊固件規格
|
|
|
6
|
ASTM A394-2005e1
|
Standard Specification for Steel Transmission Tower Bolts, Zinc-Coated and Bare
|
輸電塔鍍鋅螺栓和裸螺栓規格
|
ASTM A394-04
|
|
7
|
ASTM A449-2004be1
|
Specification for Hex Cap Screws, Bolts, and Studs, Steel, Heat Treated, 120/105/90 ksi Minimum Tensile Strength, General Use
|
|
ASTM A449-04a
|
|
8
|
ASTM A489-2004e1
|
Standard Specification for Carbon Steel Lifting Eyes
|
碳素鋼吊眼規格
|
|
|
9
|
ASTM A490-2006
|
Standard Specification for Structural Bolts, Alloy Steel, Heat Treated, 150 ksi Minimum Tensile Strength
|
經熱處理的最小抗拉強度為150 ksi的合金鋼結構用螺栓規格
|
ASTM A490-04a
|
|
10
|
ASTM A490M-2004a
|
Standard Specification for High-Strength Steel Bolts, Classes 10.9 and 10.9.3, for Structural Steel Joints [Metric]
|
結構鋼接合用等級為10.9和10.9.3的高強度螺栓規格(米制)
|
|
|
11
|
ASTM A502-2003
|
Standard Specification for Rivets, Steel, Structural
|
鋼結構鉚釘規格(AASHTO No.M228)
|
|
